Schluter Systems


Innovative Installation Systems for Tile and Stone

Schluter Systems develops products specifically for the tile industry to ensure that installations maintain integrity and durability. The Schluter product line includes tile trims, uncoupling membranes, floor heating systems, waterproof building panels, and shower systems.

Waterproofing, Uncoupling, and Drainage Membranes

Schluter®-DITRA

schluter-ditra-vancouver

Schluter-DITRA is a polyethylene mat with square, dovetailed recesses and an anchoring fleece laminated to the underside. In conjunction with tiled coverings, Schluter-DITRA forms an uncoupling, waterproofing, and vapor pressure equalization layer. Read more

Schluter®-DITRA-XL

schluter-ditra-xl-coquitlam

Schluter-DITRA-XL is a polyethylene membrane with a grid structure of square cavities, each cut back in a dovetail configuration, and an anchoring fleece laminated to its underside. Schluter-DITRA is bonded to the substrate using thin-set mortar. Read more

Schluter®-DITRA-DRAIN

schluter-ditra-drain-supplier-vancouver

Schluter-DITRA-DRAIN is a drainage membrane designed for use within thin-bed ceramic and stone tile assemblies in exterior applications. DITRA-DRAIN is typically installed over the Schluter-KERDI bonded waterproofing membrane. If the substrate does not require a waterproofing assembly (e.g., drained mortar bed), DITRA-DRAIN may be adhered directly to the substrate. Read more

Schluter®-KERDI

schluter-kerdi-vancouver

Schluter®-KERDI is a pliable, sheet-applied, bonded waterproof membrane and vapor retarder with limited crack-bridging capabilities. It is made of soft polyethylene, which is covered on both sides with a special fleece webbing. Read more

Schluter®-TROBA

schluter-troba-vancouver

Schluter-TROBA is a cleavage and drainage layer for use above a horizontal waterproofing layer and below a screed or gravel layer. It consists of a pressure-stable polyethylene sheet with perforated studs for reliable drainage. Tile applications above screeds require the installation of Schluter-DITRA as an uncoupling and waterproofing membrane. Read more

Schluter®-TROBA-PLUS

schluter-troba-plus-vancouver

Schluter-TROBA-PLUS is a durable and reliable sub-surface drainage system that prevents the possibility of capillary action. The closely positioned, cone-shaped studs can withstand heavy loads and are covered by a water permeable, fleece webbing. The studded mat raises the entire surface assembly, creating a continuous drainage area. Read more


Edge Protection & Transition Profiles for Floors

Schluter®-SCHIENE

schluter-schiene-vancouver
Schluter-SCHIENE finishes and protects the edges of tiled surfaces at transitions to other surface coverings of the same height, such as tile bordered by carpet. Read more

Schluter®-DECO

schluter-deco-vancouver

Schluter-DECO finishes and protects the edges of tiled surfaces at transitions to other surface coverings of the same height, such as wood or carpet. The exposed surface of the Schluter-DECO is wider than the Schluter-SCHIENE and can also be used to create decorative lines within tile fields. Read more

Schluter®-RENO-T

schluter-reno-t-vancouver

Schluter-RENO-T overlaps the edges of adjoining floor covering surfaces of the same height (e.g., ceramic tile or natural stone, parquet flooring, concrete pavers, laminate, etc.). Schluter-RENO-T can be installed during the tile installation or retrofit an existing installation. Read more

Schluter®-RENO-TK

schluter-reno-tk-vancouver

Schluter-RENO-TK provides a sloped transition between tiled surfaces and lower adjoining floor coverings, typically carpet. The sloped flange of the profile hides and protects the cut edge of the lower adjoining surface covering. Read more

Schluter®-RENO-V

schluter-reno-v-vancouver

Schluter-RENO-V is an adjustable transition profile designed to provide a sloped transition between tiled and lower adjoining floor coverings. The movable transition arm allows the profile to adjust to the height of the lower adjacent floor covering. Read more

Schluter®-RENO-RAMP/-K

schluter-reno-ramp-k-vancouver

Schluter-RENO-RAMP designed to provide a smooth transition between tiled surfaces and lower adjoining floor coverings. Schluter-RENO-RAMP-K is installed adjacent to existing floor coverings. Read more

Schluter®-RENO-U

schluter-reno-ramp-u-vancouver
Schluter-RENO-U is designed to provide a smooth transition from tile to lower floor coverings with a 4 mm edge that abuts the lower surface covering. Read more

Electric Floor Warming System

ditraheat-electric-floor-warming-system-vancouver

Schluter-DITRA-HEAT integrates customizable, comfortable electric floor warming with the functions associated with DITRA: uncoupling, waterproofing, vapor management and support to ensure a long lasting installation. Read more

Schluter®-KERDI-BOARD

schluter-kerdiboard-vancouver
Schluter-KERDI-BOARD is a multifunctional tile substrate and building panel, which can also be used for creating bonded waterproofing assemblies with tile coverings. It consists of an extruded polystyrene foam panel, with a special reinforcement material on both sides and fleece webbing for effective anchoring in thin-set mortar. Read more

Shower Systems

schluter-shower-systems-kit-vancouver

Schluter Shower Systems include KERDI-DRAIN, Schluter-KERDI-SHOWER-ST, Schluter-KERDI-SHOWER-SC, Schluter-KERDI-SHOWER-SR, Schluter-KERDI, Schluter-KERDI-BAND, Schluter-KERDI-SHOWER-KIT, Schluter-KERDI-FIX Read more


Call 604-942-7282 or EMAIL and find out how you can Build on Our Experience!